Friday, October 23, 2015

THE WAIT IS OVER!

Sorry to keep you all waiting! I've finally finalized everything for my V1.0 release!


Please read the following as it is all very important:

The Zip folder that you will download has all the necessary files in it for BOTH mods, installation instructions, as well as an IMPORTANT message for everyone to read. Please read everything before starting to message me with any problems. 

That being said if you do find any issues with the mods, or are generally having problems even after reading everything, feel free to shoot me a message on any of my platforms. SmashBoards and Facebook are probably the best options as I'll answer there the most promptly!



MUST READ:

Lastly, just so no one is taken by surprise, I am using adfly with my download as a way for me to get some extra support for my countless hours of work on this. Just make sure to click "skip ad" (AND ONLY SKIP AD) and it'll take you to the mediafire download page. The first page is just an ad page, so please don't click on anything there. I don't want anyone going to any random unwanted pages. I hope it isn't too inconvenient for anyone!


Without further ado, I bring to you:


Download:

69 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. HAHHAHAHHAHAHADOUWADGWIAGDUWOAGDUWAGDOWADIAWOGHILD

    ReplyDelete
  3. Yup, I just shat concrete all over the floor now. Thank you for this experience, TheBronzegreekgod.

    ReplyDelete
  4. Well....I know where my next paycheck is going......

    ReplyDelete
  5. I don't mind the link and all that, you deserve the extra support man, thank you again ! Looking forward to seeing any other work you put out!

    ReplyDelete
  6. You are a god!!! Thank you for your hard work! :D :D

    ReplyDelete
  7. Replies
    1. This comment has been removed by the author.

      Delete
    2. Thats for the codes folder.. its all explained in the instructions!

      Delete
    3. I'm assuming it's for the regular Ganondorf to Sword Ganondorf taunt switch

      Delete
    4. Oh about the gct. i just realized you might mean what is it used for. Its for his altered soundbank. Another temporary solution untill the clone engine works!

      Delete
    5. I know ^^^ I have been modding for awhile.. thanks, I am playing a custom Project M build with cBliss and Stage Expansion. Reasons why it does not work?

      Delete
    6. If you have custom stuff with the gct, you'll need to re edit the gct!
      You need mine for his sfx to work (for now anyway)

      Delete
    7. Hey so i just thought of this... can you edit your gct?
      if so, put this code into YOUR GCT and you should be good to go!

      04AD8A64 00000142

      Delete
  8. After trying him (for a little while keep in mind) i can say he is Absolutely amazing, he doesn't feel overpowerd at all to be honest with you i mean this is PM were talking about.

    ReplyDelete
  9. Not sure what to think of you using an ad.fly link when you mainly asked the likes of Drogoth and I for help. It would be one thing if you did and figured everything out yourself, but for the majority of your project, you've been needing assistance with various things. I'm not entirely bothered by it. It's just that I would have appreciated it if you told me you were going to use an ad.fly link to distribute our work. I would also appreciate a credits list of the people who helped you with this project. It doesn't really sit well having you profiting off the work of the ones who helped you.

    ReplyDelete
    Replies
    1. I'm willing to donate to you guys too, you have helped me a ton so i have no problem with that if you'd like

      Delete
    2. Oh! And my bad I did credit everyone in my trailer so I didn't think to do it here too! I will remedy that immediately.

      Apologies!

      Lastly, sorry for not asking you about the ad.fly link. I should have done that too, I hope you're not too upset about that. I didn't think of it being an issue. I mean I absolutely couldn't have done this without your help but I have put in endless hours into this so that's the reason I did it.

      Delete
    3. I wouldn't want to be profiting off of edited copyrighted work. Just to be safe, I would add a donation link and replace the ad.fly link. I'm sure people would be more than happy to support you, and everyone would win from it.

      Delete
    4. It's alright. Like I said before, I'm not bothered by you accepting things like donations, and since everything's settled, it's all good now. I just don't want you getting into possible legal trouble with Nintendo.

      Delete
    5. Hm good point. Do you think something as small as adfly would cause problems with the big N? I feel like lotsa ppl use adfly to all kinds of links.

      Delete
  10. Hey guys im using Brawl to play this, do I add this file to my SD card with the other project M files? Or do i delete the other ones and just have this file on my SD card? Im confused and its not working, any help guys?

    ReplyDelete
    Replies
    1. There are instructions in the download. Do you see them?

      Delete
    2. I cant find any instructons, where in the download is it?

      Delete
  11. Just download Project M 3.6, Drag and drop all the files onto your SD card. And then drag the 'Codes' And 'Project M' Files onto your SD card :). Have fun

    ReplyDelete
  12. Wait that's it? What about the download on this page? The Ganon one

    ReplyDelete
  13. Oh yeah, That is what I meant when I said the Codes and Project M files
    Place all of PM's folders onto the SD, then place all of Project Ganondorf's on.

    ReplyDelete
  14. Did 3.6 come out in the past few weeks? Cuz I downlaoded project M a few weeks ago and it was working but today when I added the Ganon file it didn't work. Is 3.6 a new update or has it been out a while?

    ReplyDelete
  15. Tengp el mismo problema ya q tengo el proyecto m y luego descarhe el de ganondorf y no funcionab no salían sus ttakea ni movimientos

    ReplyDelete
  16. Hey man this mod is terrific, love it! I noticed a couple of things though, firstly it'd be awesome if there was a way to start a game as Sword Ganon rather than taunting. This would also let you play a Sword Ganon CPU. Secondly, with the OoT Ganon's Side-B, the audio sounds a bit off compared to the rest of the moveset. Thanks heaps again man, I love this mod so much!

    ReplyDelete
    Replies
    1. Also you removed normal Ganons cape? Is there any way to avoid getting rid of that?

      Delete
    2. https://www.youtube.com/watch?v=7Zz5wCqG5ZY

      And what ganon doesnt have a cape?

      Delete
    3. The regular PM Ganon has Wizard Punch instead of his cape

      Delete
    4. Oh ya i reverted back to the warlock punch

      Delete
  17. i have to give major props to you man and everyone else who helped. this is by far one of the best project m mods i have seen to date. i love it. i cant wait to see what you have in the future!

    Side note: do you think you will be able to have lucario back some time in the future or will he always need to be replaced?

    ReplyDelete
    Replies
    1. Lucario will be back by next release (unless next release is a quick update then itll be 2 releases from now)
      Read my faq and all that stuff on here, lotsa questions will be answered there!

      Delete
  18. Playing both Gannons are fun as hell. I can't say I'm complete happy, though. Lucario was like my main person on Project M :P Aside from that, AMAZING job with the Gannon mods. I'm hoping we can see more amazing mods like this from you, would be really fun.

    ReplyDelete
  19. is there any chance that this becomes the standard for PM? I mean the PM devs adding this to the main game, it is amazing and I would play PM a lot more if this was the case

    ReplyDelete
    Replies
    1. I'd love for this to happen, but I don't think it's gona happen unfortunately

      Delete
  20. what about that beast ganon you teased at the end of the announcement trailer at A&C?

    ReplyDelete
  21. Hey guys I have a question. So I am using Brawl on the Wii for this with a 2GB SD card. I have the project m files on my card and I added the Ganon file to the card as well. It loaded up project m fine but the custom ganons are not there? Am I not doing something right? Any help guys? I really want to play as him cuz he looks amazing and im a huge Zelda fan, thanks guys.

    ReplyDelete
    Replies
    1. Did you try picking lucario? OOT ganon is lucario and sword ganon is normal ganon - you have to press down taunt to use the sword

      Delete
    2. Oh I did not know OOT Ganon is Lucario, ill try that. Thank you! And i did press down taunt as Ganon but he just put his sword back

      Delete
  22. Oh I did not know OOT Ganon is Lucario, ill try that. Thank you! And i did press down taunt as Ganon but he just put his sword back

    ReplyDelete
    Replies
    1. You may have made a mistake installing - or maybe you didnt actually boot up project m? Is the rest of the game project m when u play?

      Delete
    2. Yes it is project M, and im still having the problem, no custom Ganon :(

      Delete
  23. Don't really get it, when I download the file my computer isn't able to read it. Any tips?

    ReplyDelete
    Replies
    1. You might need to get winrar to unzip the file

      Delete
  24. Is it possible for the mod to function with only Sword Ganon's codes? Nothing against Oot Ganon, I just want to keep Lucario until the new PG update where they are separated.

    ReplyDelete
    Replies
    1. Easy, just don't overwrite the lucario files and you are set

      Delete
  25. Hey BronzeGreekGod! Sword Ganon looks and plays very well. With a few tweaks he would feel like a complete character. As for warlock Ganon, he seems a little unfinished, but still very fun. Thanks for bringing us this mod! I have a lot more I would like to comment on if you are looking for any more feedback

    ReplyDelete
  26. This comment has been removed by the author.

    ReplyDelete
  27. if i replaced somone else say like link with oot ganon instead of lucario would the everything still work?

    ReplyDelete
  28. Could I get the code you added to the PM GCT on it's own? I'd rather just add it to my PM GCT with other codes on it

    ReplyDelete
    Replies
    1. 04AD8A64 00000142 Here Ya Go This Exactly What I Did To Mine :)

      Delete
  29. Just wondering, what's the movelist for OOT Ganondorf?

    ReplyDelete
  30. Is there a way to only put sword ganon into project m and take out oot ganon

    ReplyDelete
  31. Is there a way to install this on dolphin, and if so, how?

    ReplyDelete
  32. I'm sorry if you have heard this before, but my game froze the moment I picked him and chose a stage. Is that another kink needing to be worked out?

    ReplyDelete
    Replies
    1. This is only happening to Ganon-Ganon, not Lucario-Ganon. Before, I had Triforce Ganon, but I've replaced or deleted every known file involving it. The only two other mods I have are Ridley and the Smash 3 Mewtwo skins.

      Delete
  33. This comment has been removed by the author.

    ReplyDelete
  34. I use project m legacy, do you know how to get it to work with legacy? I tried using GCTEdit but when I try to add the code you have suggested, it says that the input code size needs to be divisible by 16. I also tried to use GCTEdit to export the legacy codeset as a txt and use code manager to add it but when I booted it up it crashes

    ReplyDelete
  35. Nevermind, got it to work. First impression, this is amazing

    ReplyDelete
  36. So... Question about 2-cancelling with ganon. Is that a thing in this version, because I cant seem to cancel anything with sword ganon

    ReplyDelete