Download

Project: Ganondorf 2.1


Download:


41 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. The install Link for me isn't working. It closes tab immediately

    ReplyDelete
  3. This mod is great! looking forward to CSPs and announcer calls for OOT ganon!

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete
  5. This comment has been removed by the author.

    ReplyDelete
  6. so how would you set this up for Dolphin?

    ReplyDelete
  7. My wii resets every time I try to start up pm. Any solutions????

    ReplyDelete
    Replies
    1. You should try to maybe uninstall Project M and then reinstall it. If you're using the hackless method, you should load it from Stage Builder. If you're using the homebrew method, you should load it from the HBC and click Project M Launcher. If they launch, you should then try reinstalling Project Ganondorf. To do this you have to first delete the files in this directory: projectm/pf/fighter/ganon and projectm/pf/fighter/lucario. Once you do that, navigate to projectm/pf/sfx and copy the sounds from said folder from Project Ganondorf's version and allow replacing it. By doing this, the mod should work just fine afterwards. Remember, you can get Project M after the shutdown at the following Link (get the joke) http://projectmirror.no-ip.org/

      Delete
  8. What version of project m is this for?

    ReplyDelete
  9. Replies
    1. Simple.
      Get 7-zip or winrar.
      Then extract the rar file.

      Delete
  10. This comment has been removed by the author.

    ReplyDelete
  11. This comment has been removed by the author.

    ReplyDelete
  12. Every time I load a match with Oot ganon it crashes. Help?

    ReplyDelete
    Replies
    1. Check your files,sometimes the files go to a place if you just move them mindlessly

      Delete
  13. Just waiting on 2.0 to drop

    ReplyDelete
  14. I got a brand new 2gb sd card and installed 2.0 on the card. However, when i go to launch it through brawl using stage builder, nothing happens. It doesn't crash either. Does anyone know whats wrong?

    ReplyDelete
    Replies
    1. Did you install Project M Hackless or Homebrew Launcher?

      Delete
  15. التنظيف من الخدمات المميزة التى تقدمها شركة بسمة الرياض فهناك عدد من الشركات المتواجدة فى الاسواق والتى تساعد فى القيام باعمال التنظيف على اعلى مستوى فاذا كنت تعانى من خدمات التنظيف التقليدى وتعانى من وجود الكثير من الاشياء التى تحتاج الى الوقت والجهد والاموال وعلى الرغم من ذلك لا تؤدى الى النتائج الغير مرغوب فيها فلا داعى للقلق من شان كل ذلك فانت الان تمتلك افضل الشركات المميزة فالشركة تعتمد على افضل العمالة المدربة على اعلى مستوى من التميز والتدريب المستمر من اجل انجاز الكثير من المهام المخصصه فى التنظيف والاستعانه بالاجهزة والالات المتواجدة لدينا كل ذلك فى مقابل اقل الاسعار المتواجدة فى الاسواق فاذا كنت فى اى مكان فى الخرج او خارجها فعليك ان تستعم بينا على الفور فى القيام بكل ما تتمناه وتحقق افضل النتائج المميزة.
    تعتبر شركة تنظيف بالخرج من اهم وافضل الشركات المتواجده ى الخرج والتى على اتم استعداد للقيام باعمال التنظيف والاهتمام بكافة الخدمات المنزليه بطريقه حرفيه مميزة فاذا اراد ان تستعن بينا فنحن نقوم باعمال التنظيف فى المواعيد المظبوطة بالاضافة الى القيام بكل الخطوات وتحقيق كل ما تتمناه فى اقل وقت ممكن فلا تتردد فى التواصل معنا .

    ReplyDelete
  16. If you don't mind me asking, I noticed in the Project M folder included in the download you used BrawlEx for Oot Ganon. I'd like to use this mod with the leaked Dev Build of Project M but I'm doubtful that the two will cooperate. Can you give me some insight on this? Thanks!

    ReplyDelete
    Replies
    1. If you use PMEX you can make it work just fine, but make sure you use lucario's project m brawl ex module (.rel)

      Delete
  17. so, theres something that's got me confused
    i know how to install proyect M
    but what exacly do i do?
    download both proyect M and proyect ganon and fuse them?
    or just proyect ganon?
    please help :S

    ReplyDelete
  18. I'm trying to boot up P:G, but every time I go to Stage Builder to launch it, nothing happens. It doesn't crash or restart, it's just that nothing happens. I'm using the Hackless method. Any suggestions on what I should do?

    ReplyDelete
  19. It's not letting me download, it just opens a new tab of the same page.

    ReplyDelete
  20. This comment has been removed by the author.

    ReplyDelete
  21. Hello!
    Hey Do you know why waluigi appears in the character select screen and crash my game when i install this mod?
    Well, acctually it happends at the secon time i start the game, i mean, i install the mod, and it works, but if i turn the console wii off and star the game again, waluigi appears and crash the game.
    I would really appreciate your answer

    ReplyDelete
  22. can someone please help me with this? I am running the Homebrew version, and I can get sword ganon to work just fine, but I cant get OOT Ganon to appear on the character select screen. Ive watched just about every video I can on how to get this done, and none are working out for me.
    Thank you

    ReplyDelete
  23. HOW DO I DO THIS, CAN SOMEONE DO A TUTORIAL

    ReplyDelete
  24. Ok do I just have to download Project ganondorf 2.1 and put it to the root of the sd card in order for it to work? Or Do I have to download both that and Project M as well. I had PM, but it looked like your files came with PM alongside PG so I thought I could put your files on a different sd card, which I did, and nothing happened. Do I have to delete the Homebrew stuff that came along with your download? Or Is the order of my files maybe wrong?

    ReplyDelete
    Replies
    1. What I did was download directly onto the SD card with a functioning version of PM on it already, overwriting the necessary files.
      Step 1 - have homebrew PM on a 2gb SD card
      Step 2 - download this
      Step 3 - extract files to the SD card and choose to replace
      uhh... hope that helped; I might've missed a step

      Delete
  25. Anyway to just replace ganon on an existing build

    ReplyDelete
  26. I got the download but now what? I put the boot.elf in my game folder (I'm using dolphin. I have brawl just not any SD cards I can use) all that happens is I get Project M... and Ganondorf is no different. Do I have to do something to activate Mod Ganondorf mode? or what?

    ReplyDelete