Please read the following as it is all very important:
The Zip folder that you will download has all the necessary files in it for BOTH mods, installation instructions, as well as an IMPORTANT message for everyone to read. Please read everything before starting to message me with any problems.
That being said if you do find any issues with the mods, or are generally having problems even after reading everything, feel free to shoot me a message on any of my platforms. SmashBoards and Facebook are probably the best options as I'll answer there the most promptly!
MUST READ:
Lastly, just so no one is taken by surprise, I am using adfly with my download as a way for me to get some extra support for my countless hours of work on this. Just make sure to click "skip ad" (AND ONLY SKIP AD) and it'll take you to the mediafire download page. The first page is just an ad page, so please don't click on anything there. I don't want anyone going to any random unwanted pages. I hope it isn't too inconvenient for anyone!
Without further ado, I bring to you:
Download:
This comment has been removed by the author.
ReplyDeleteHAHHAHAHHAHAHADOUWADGWIAGDUWOAGDUWAGDOWADIAWOGHILD
ReplyDeleteYup, I just shat concrete all over the floor now. Thank you for this experience, TheBronzegreekgod.
ReplyDeleteWell....I know where my next paycheck is going......
ReplyDeleteI don't mind the link and all that, you deserve the extra support man, thank you again ! Looking forward to seeing any other work you put out!
ReplyDeleteYES!!! Thank you!
ReplyDeleteYou are a god!!! Thank you for your hard work! :D :D
ReplyDeleteWhat is the .GCT for?
ReplyDeleteThis comment has been removed by the author.
DeleteThats for the codes folder.. its all explained in the instructions!
DeleteI'm assuming it's for the regular Ganondorf to Sword Ganondorf taunt switch
DeleteOh about the gct. i just realized you might mean what is it used for. Its for his altered soundbank. Another temporary solution untill the clone engine works!
DeleteI know ^^^ I have been modding for awhile.. thanks, I am playing a custom Project M build with cBliss and Stage Expansion. Reasons why it does not work?
DeleteIf you have custom stuff with the gct, you'll need to re edit the gct!
DeleteYou need mine for his sfx to work (for now anyway)
Alright no problem, thanks.
DeleteHey so i just thought of this... can you edit your gct?
Deleteif so, put this code into YOUR GCT and you should be good to go!
04AD8A64 00000142
After trying him (for a little while keep in mind) i can say he is Absolutely amazing, he doesn't feel overpowerd at all to be honest with you i mean this is PM were talking about.
ReplyDeleteNot sure what to think of you using an ad.fly link when you mainly asked the likes of Drogoth and I for help. It would be one thing if you did and figured everything out yourself, but for the majority of your project, you've been needing assistance with various things. I'm not entirely bothered by it. It's just that I would have appreciated it if you told me you were going to use an ad.fly link to distribute our work. I would also appreciate a credits list of the people who helped you with this project. It doesn't really sit well having you profiting off the work of the ones who helped you.
ReplyDeleteI'm willing to donate to you guys too, you have helped me a ton so i have no problem with that if you'd like
DeleteOh! And my bad I did credit everyone in my trailer so I didn't think to do it here too! I will remedy that immediately.
DeleteApologies!
Lastly, sorry for not asking you about the ad.fly link. I should have done that too, I hope you're not too upset about that. I didn't think of it being an issue. I mean I absolutely couldn't have done this without your help but I have put in endless hours into this so that's the reason I did it.
I wouldn't want to be profiting off of edited copyrighted work. Just to be safe, I would add a donation link and replace the ad.fly link. I'm sure people would be more than happy to support you, and everyone would win from it.
DeleteIt's alright. Like I said before, I'm not bothered by you accepting things like donations, and since everything's settled, it's all good now. I just don't want you getting into possible legal trouble with Nintendo.
DeleteHm good point. Do you think something as small as adfly would cause problems with the big N? I feel like lotsa ppl use adfly to all kinds of links.
DeleteHey guys im using Brawl to play this, do I add this file to my SD card with the other project M files? Or do i delete the other ones and just have this file on my SD card? Im confused and its not working, any help guys?
ReplyDeleteThere are instructions in the download. Do you see them?
DeleteI cant find any instructons, where in the download is it?
DeleteJust download Project M 3.6, Drag and drop all the files onto your SD card. And then drag the 'Codes' And 'Project M' Files onto your SD card :). Have fun
ReplyDeleteWait that's it? What about the download on this page? The Ganon one
ReplyDeleteOh yeah, That is what I meant when I said the Codes and Project M files
ReplyDeletePlace all of PM's folders onto the SD, then place all of Project Ganondorf's on.
Did 3.6 come out in the past few weeks? Cuz I downlaoded project M a few weeks ago and it was working but today when I added the Ganon file it didn't work. Is 3.6 a new update or has it been out a while?
ReplyDeleteTengp el mismo problema ya q tengo el proyecto m y luego descarhe el de ganondorf y no funcionab no salÃan sus ttakea ni movimientos
ReplyDeleteHey man this mod is terrific, love it! I noticed a couple of things though, firstly it'd be awesome if there was a way to start a game as Sword Ganon rather than taunting. This would also let you play a Sword Ganon CPU. Secondly, with the OoT Ganon's Side-B, the audio sounds a bit off compared to the rest of the moveset. Thanks heaps again man, I love this mod so much!
ReplyDeleteAlso you removed normal Ganons cape? Is there any way to avoid getting rid of that?
Deletehttps://www.youtube.com/watch?v=7Zz5wCqG5ZY
DeleteAnd what ganon doesnt have a cape?
The regular PM Ganon has Wizard Punch instead of his cape
DeleteOh ya i reverted back to the warlock punch
Deletei have to give major props to you man and everyone else who helped. this is by far one of the best project m mods i have seen to date. i love it. i cant wait to see what you have in the future!
ReplyDeleteSide note: do you think you will be able to have lucario back some time in the future or will he always need to be replaced?
Lucario will be back by next release (unless next release is a quick update then itll be 2 releases from now)
DeleteRead my faq and all that stuff on here, lotsa questions will be answered there!
Playing both Gannons are fun as hell. I can't say I'm complete happy, though. Lucario was like my main person on Project M :P Aside from that, AMAZING job with the Gannon mods. I'm hoping we can see more amazing mods like this from you, would be really fun.
ReplyDeleteis there any chance that this becomes the standard for PM? I mean the PM devs adding this to the main game, it is amazing and I would play PM a lot more if this was the case
ReplyDeleteI'd love for this to happen, but I don't think it's gona happen unfortunately
Deletewhat about that beast ganon you teased at the end of the announcement trailer at A&C?
ReplyDeleteThat was a teaser of things to come :P
DeleteHey guys I have a question. So I am using Brawl on the Wii for this with a 2GB SD card. I have the project m files on my card and I added the Ganon file to the card as well. It loaded up project m fine but the custom ganons are not there? Am I not doing something right? Any help guys? I really want to play as him cuz he looks amazing and im a huge Zelda fan, thanks guys.
ReplyDeleteDid you try picking lucario? OOT ganon is lucario and sword ganon is normal ganon - you have to press down taunt to use the sword
DeleteOh I did not know OOT Ganon is Lucario, ill try that. Thank you! And i did press down taunt as Ganon but he just put his sword back
DeleteOh I did not know OOT Ganon is Lucario, ill try that. Thank you! And i did press down taunt as Ganon but he just put his sword back
ReplyDeleteYou may have made a mistake installing - or maybe you didnt actually boot up project m? Is the rest of the game project m when u play?
DeleteYes it is project M, and im still having the problem, no custom Ganon :(
DeleteDon't really get it, when I download the file my computer isn't able to read it. Any tips?
ReplyDeleteYou might need to get winrar to unzip the file
DeleteIs it possible for the mod to function with only Sword Ganon's codes? Nothing against Oot Ganon, I just want to keep Lucario until the new PG update where they are separated.
ReplyDeleteEasy, just don't overwrite the lucario files and you are set
DeleteHey BronzeGreekGod! Sword Ganon looks and plays very well. With a few tweaks he would feel like a complete character. As for warlock Ganon, he seems a little unfinished, but still very fun. Thanks for bringing us this mod! I have a lot more I would like to comment on if you are looking for any more feedback
ReplyDeleteThis comment has been removed by the author.
ReplyDeleteif i replaced somone else say like link with oot ganon instead of lucario would the everything still work?
ReplyDeleteMine still doesn't work :(
ReplyDeleteCould I get the code you added to the PM GCT on it's own? I'd rather just add it to my PM GCT with other codes on it
ReplyDelete04AD8A64 00000142 Here Ya Go This Exactly What I Did To Mine :)
DeleteJust wondering, what's the movelist for OOT Ganondorf?
ReplyDeleteIs there a way to only put sword ganon into project m and take out oot ganon
ReplyDeleteIs there a way to install this on dolphin, and if so, how?
ReplyDeleteI'm sorry if you have heard this before, but my game froze the moment I picked him and chose a stage. Is that another kink needing to be worked out?
ReplyDeleteThis is only happening to Ganon-Ganon, not Lucario-Ganon. Before, I had Triforce Ganon, but I've replaced or deleted every known file involving it. The only two other mods I have are Ridley and the Smash 3 Mewtwo skins.
DeleteThis comment has been removed by the author.
ReplyDeleteI use project m legacy, do you know how to get it to work with legacy? I tried using GCTEdit but when I try to add the code you have suggested, it says that the input code size needs to be divisible by 16. I also tried to use GCTEdit to export the legacy codeset as a txt and use code manager to add it but when I booted it up it crashes
ReplyDeleteNevermind, got it to work. First impression, this is amazing
ReplyDeleteSo... Question about 2-cancelling with ganon. Is that a thing in this version, because I cant seem to cancel anything with sword ganon
ReplyDelete*l-cancelling
Delete